salt free

From lime scaling to the breakdown of machinery, hard water causes a lot of troubles in daily household chores. It makes hair frizzy and dull, leaves spots on tiles and of course increases water consumption. You can relate to it if you are dealing with hard water. Solution to this problem is getting a water softener system for your home. The challenge is to find an affordable, convenient and appropriate water softener.

You might have researched about hard water, if not then click on Hard_water for necessary information.

Two types of water softeners are available in the market i.e. Salt Based or Salt-Free Water Softeners. Do you want to know which softening system is best for your home? Check out some of the best water softener systems for 2019 and stay tuned to this page for more information!

Salt Based Water Softeners Mechanism:

Water softening means to alter hard water into soft water, by removing minerals (calcium sulfate, magnesium, and iron) by an ion exchange process. Salt-based water softeners consist of resin bed that filters out the hardness of water by sodium.

When resin bed reaches a saturation point, regeneration cycle begins and then water flows from the valve to backflushes, where minerals get trapped and later drains out. A minimal amount of sodium gets transferred to the soft water (which is considered negligible).

salt based


  • A salt based softener will make sure that minerals causing hard water are entirely removed from the water.
  • It ensures descaling of stubborn limescale from pipes, fittings, and everything that comes in contact with it.
  • Water-based equipment like boilers and heaters will last longer. It is reported that hard water reduces the efficacy of appliances by 40 percent.
  • Water consumption will be reduced and time will be saved. Now, you don’t need to spend the time removing soap scum from the skin. Even clothes will feel fresh and light, no white film of detergent will be present.


  • A salt based softener is a bit expensive.
  • It requires more maintenance because of the way it works
  • As salt are the core ingredient resin beds needs to be changed within a period of time.
  • Water is wasted during the regeneration process.

Salt-free Softeners Mechanism:

As the name says salt-free, these softeners do not use salts for water softening. They primarily descale lime scaling. There is no ion exchange process instead it uses a catalytic method known as Template Assisted Crystallization (TAC). Citric acid is used to balance the pH levels of water known as conditioning.

No impurities are trapped hence no cleaning process needed.

salt free


  • Less expensive and long-lasting than salt based systems.
  • No chemicals are involved and as it is salt-free there is no sodium present in water
  • They are easy to install and come with installation kit.
  • It requires less space for installation and fits to even tight places.
  • It saves water, energy, and money.
  • It does not wash away natural nutrients of water.
  • It is the best option if you are looking to get rid of limescale completely.
  • Fewer maintenance costs are involved and you have a lot of options to choose from.


  • It does not remove rocks and minerals completely from water as it is mainly used for removing limescale.
  • Cartridges need to be replaced timely.

Which is a better system for your home?

Now you know all the necessary information that is needed to choose a water softener. You have both options. Go with the system which suits your current situation after analyzing water pH, space, people and expenses. Choose wisely!

Posts are prone to damages through rotting and damage from insects that is why you always need to repair them before you lose your fence. However, before you think of anything to do with repairs, you should value yourself first Well how do you safeguard yourself from possible injuries? You need to wear protective gear such as gloves to protect your hands from possible bruises.

Repairing a broken post is a manageable task. It all depends on how the first was erected in the ground and the type of the post. The following are some of the tips on how you can get this job well done.

Examine the posts Why is it necessary to examine the post? Examining the post is the first step to prepare for repair. This is to say that, some fences have its post strengthened using cement especially the corner posts. On the other hand, most of the posts that are used in chain link fences are usually placed in cement.

Remove the fences from the post. You can remove the fence from the post by unscrewing the nails from the fence. This is to allow you to work on the post independently because the fence will not be an obstruction. Furthermore, this gives room to repair the post that was broken.

Lift the post if it is broken at the bottom or if it is loose This is dependent on the extent of breakage of the post. If it is loose enough for you to pull out then proceed and do so if the post is broken at the bottom you can lift it but ensure that no part remains in the hole which the post had been placed. However, if you can’t achieve this don’t panic all you need to do is to proceed to the next step.

Cut the post at the bottom level. You should do this if by any means it will not inconvenience you in the future. Alternatively, determine if cement was used in sealing the hole, if yes start digging around it to provide sufficient space for you to pull out the broken posts.

Remove the old posts When removing the old post, it is far much easy if the hole was not cemented, all you need to do is to shake it back and forth until it loosens. After that, you can you can call a friend to support you in pulling out the post.

Replacement of the broken posts When making replacements, it is essential to choose a new post which has the same height and dimensions with the post that had been broken. Once you have met this requirement dig the hole close to the old hole where you had removed the broken post. Ensure it is thick enough for the new post to fit in well Place the new post in the hole and fill it using gravel or cement depending on your choice.

Thereafter, return the fence which you had dismantled during the repair. By following this simple procedure, you will have achieved your goal, and your fence will be ready to be used again!

Fences can be used for many things. From barriers and boundaries to a private patio, you name it. Choosing a fence for your home can be a tricky tasked given the many options to choose from. It is therefore advisable to seek an expert’s advice to help you understand the pros and cons of the various types in your list so that you can make an informed decision. The following is a guide on the factors you should consider when choosing.

Wood Fence Vs Chain Link Fence


I hope I am not alone in this, money matters. Often when you are faced with a choosing situation, the cost factor comes ringing into your mind. Chain link carries the day when you are looking for a cheap fence that can be erected quickly. Wood fences come in different finishes and can easily match with your home. However, to get high quality wood and pressure- treating the wood you may need to dig deeper into your pocket.

Durability and Maintenance

Metal lasts longer than wood. Apart from being galvanized chain link fences are not subject to issues like rot, termites, and mold. The maintenance cost of wooden fences is also higher compared to chain link fences. Besides, once chain-linked fences are installed all that is needed is the occasion removal of rut spots making their maintenance cost very low.


Privacy is a one-sided discussion with the wooden fence having the upper hand no matter the style of wooden fence you use. Wood fences can be constructed in a manner that leaves no gap between the panels. This can also provide some safe zone to pets as they cannot be distracted from outside.


If you live in an area which is prone to high wind conditions, wooden fences might be of greater advantage as compared to their chain link counterparts. The large surface area of the panels or struts acts as a barrier thus reducing the speed and hence impact of the winds in your home.


Chain link fences only differ in terms of size and heights. On the other hand, wooden fences will offer you a wide range of styles, colors, and sizes to pick from.

Choosing is a matter of personal choice, but wooden fences happen to be the majorities choice given the added advantages they come with like, allowing your family and guests an easy time at the pool and making your home look classy. If you engage a professional in wooden fencing services, you may get the benefit of enjoying the Red Cedar’s moisture as well as its insect resistance ability, the Oak’s strength and of course the durability and beauty of the Ipe wood.


The choice depends on whatever factor you are basing your decision on. Going with the cost factor, it is chain link while style favors wooden fencing. But like I said earlier, it’s a matter of personal choice. You have the final say and, way too.